Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• upon request, other materials (e.g. 1.4016, 1.4509) and thicknesses may be supplied in the form of coils (20.0 t)

• standard: 0.8 - 4,0 mm

• R12 – longitudinal grinding

• 2500 x 1250 mm
• 3000 x 1250 mm
• 3000 x 1500 mm
• Fixed coil lengths of up to 3.0 mm available at short notice

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• upon request, other materials (e.g. 1.4016, 1.4509) and thicknesses may be supplied in the form of coils (20.0 t)

• standard: 0.8 - 4,0 mm

• R13 – crosshatched grinding

• 2500 x 1250 mm
• 3000 x 1250 mm
• 3000 x 1500 mm
• Fixed coil lengths of up to 3.0 mm available at short notice

"Made in Germany"
We produce our surfaces on our company-owned embossing/straightening machines.
Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• 1.4539

Standard:

• pattern-rolled / ground

Available anti-slip options:

• R11: SE – 5WL- 80 (thickness 0.8 / 1.5mm)
• R12: SE – 5WL- 636 (thickness 2.0mm)
• R13: SE – 5WL - 636 (thickness 0.8 / 1.5mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

"Made in Germany"
We produce our surfaces on our company-owned embossing/straightening machines.
Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• 1.4539

Standard:

• pattern-rolled grinding

Available anti-slip options:

• R  9: SE - 6WL- 2R (thickness 0.8 mm)
• R11: SE - 6WL- 604 (thickness 0.8 / 1.5mm)
• R12: SE - 6WL - 636 (thickness 1.5 / 2.0mm)
• R13: SE - 6WL - 636 (thickness 0.8 mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

"Made in Germany"
We produce our surfaces on our company-owned embossing/straightening machines.
Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• 1.4539

Standard:

• pattern-rolled grinding

Available anti-slip options:

• R  9: SE – 7WL- 2R (thickness 0.8)
• R11: SE – 7WL- 604 (thickness 0.8 / 1.5mm)
• R12: SE – 7WL - 636 (thickness 2.0mm)
• R13: SE – 7WL - 636 (thickness 0.8 / 1.5mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

Our patterned surfaces are produced in Germany on a sendzimir framework.
Properties:

• one-sided embossing, smooth underside
• better / deeper design
• short production routes in Europe
• cross-coil batches possible
• facade quality possible

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)
• in case of complete coil spreading (approx. 20 t), other materials possible upon request

Standard:

• SE crosshatched grinding 636 

Optional:

• R11: SE – Diamaonds - 150 (thickness 0.8 / 1.0 / 1.25/ 1.5 / 2.0mm)
• R13: SE – Diamonds - 636 (thickness 0.8 / 1.0 / 1.25/ 1.5 / 2.0mm)

Standard:

• 2500 x 1250 mm
• 3000 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500 mm
• length of up to 6000 mm
• slit strips upon request (minimum amount: approx. 3 t)

• standard: 0.8 – 2.0 mm
• in case of complete coil spreading (approx. 20 t), other thicknesses possible upon request

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine.

Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• upon request, other materials (e.g. 1.4404) and thicknesses may be supplied in the form of coils (20.0 t)

Standard:

• SE crosshatched grinding 636 

Optional:

• R11: SE – 22R-11/150 (thickness 0.8 / 1.0 / 1.25/ 1.5 / 2.0mm)
• R13: SE – Diamonds- 636 (thickness 0.8 / 1.0 / 1.25/ 1.5 / 2.0mm)

Standard:

• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500 mm
• length of up to 6000 mm

• standard: 0.8 – 2.0 mm
• upon request: 0.6 / 3 mm ( in the form of coils ) 20 t

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine.

Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4301 (stainless austenitic steel)
• upon request, other materials (e.g. 1.4016, 1.4404) and thicknesses may be supplied in the form of coils (20.0 t)

Standard:

• SE-2R/ BA bright-annealed 
• SE crosshatched grinding 636

Optional:

• R9  : SE – groove (thickness 1.5mm)
• R11: SE – groove K36 cross-ground (thickness 1.5mm)
• R13: SE – groove - 636 (thickness 1.5mm)

Standard:

• 2500 x 1250 mm
• 3000 x 1250 mm

Fixed coil lengths (available at short notice):

• width of 1250 mm
• length of up to 6000 mm

• standard: 0.8 – 2.0 mm
• upon request: 0.6 / 3 mm ( in the form of coils ) 20 t

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine.

Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview.
Please request free original samples for project planning.

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)

Available anti-slip options:

• R10: SE - KK10 (thickness 0.8 / 10mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm 

• 0,8 - 10 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview. Please request free original samples for project planning

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)

Available anti-slip options:

• R11: SE - KK64i (thickness 0.8 / 10mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm 

• 0,8 - 10 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview. Please request free original samples for project planning

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)

Available anti-slip options:

• R12: SE - KK12 (thickness 0.8 - 10mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm 

• 0,8 - 10 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview. Please request free original samples for project planning

Both the Workplace Ordinance and the UVV "General Regulations" (GUV-V A1, previously GUV 0.1) stipulate that floors must be slip-resistant. They must also be easy to clean. This applies to work, cooling, storage, machine and ancillary rooms to the extent that it is operationally possible and necessary for safety or health reasons.

• 1.4016 (stainless ferritic steel)
• 1.4301 (stainless austenitic steel)
• 1.4401/04 (stainless austenitic chrome-nickel-molybdenum steel)

Available anti-slip options:

• R10: SE - 604 (thickness 0.8 / 10mm)

Standard:

• 2000 x 1000 mm
• 2500 x 1250 mm
• 3000 x 1500 mm

Fixed coil lengths (available at short notice):

• widths of 1250 and 1500mm
• length of up to 6000 mm 

• 0,8 - 10 mm

For protection in handling and processing the surfaces, we use ULFII PF584 - Fiber/Co2 film as standard on our fully automatic foiling machine. Other coating types can be found under downloads.

The representations of the surfaces do not necessarily correspond to the original sizes and serve only to give you an initial overview. Please request free original samples for project planning